Saab 9-3 Key Replacement Tools To Help You Manage Your Everyday Life
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to add the second key. It requires dealer support using a handheld computer called Tech-2. Then the transponder is replaced and a key are required to be purchased.
Rotate your keys to stop one from deteriorating faster than the next. This will help keep your keys in pristine condition.
Replacement Case
Unlike the classic Saab keys of the past keys, the modern key fobs contain electronics that make it difficult to duplicate. This has made theft of cars considerably more difficult than it was just a few years ago. However, it has made the replacement of lost keys a much more costly endeavor.
Saab 9-3 owners must have two keys working. If one is lost it costs a fortune to get another one for the car, as it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers usually charge between $100 and $200 for this.
There are saab key programming www.g28carkeys.co.uk to avoid the high cost. Some parts suppliers will use the code of an extra key to cut a brand new metal blade for a fraction of what the dealer charges. The key, however, must be the same as the original one to function properly within your car.
Follow these steps to replace the case. You will need to have a flathead and patience. With the screwdriver, break off the plastic and then remove the emergency key. Once the case is open, remove the electronics and put them back into your new case. Place the key with the correct badge into the case.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable part that can be replaced easily and quickly. This YouTube tutorial for DIY Cyclone Cyd will show you how to replace the remote key fob battery in only four steps. This tutorial can be used for any modern-day saab key fob though the process may vary slightly.
The first step is to find the button that lets off the backup key inside the fob. This is usually located close to the Saab logo on the back of the fob. Next you will need a flathead screwdriver to insert into the small hole inside this button. This should be enough to open the fob case to allow you to change the battery.
Once you have installed the battery CR1632, you are able to reassemble the remote key fob. Then, you can program it into your car. The entire process should not take more than an hour, if not less. It's a very easy procedure that doesn't require any special tools.
The process can be a bit more complicated in the event that you lose the key, but it's possible. The dealer has to first verify the VIN of the vehicle and order an additional TWICE module and key blade that is matched to the unique code. After that, they'll need to cut the replacement key and then program it using the latest software tool known as MDI.
Key Replacement Fob
The key fob is the piece that locks and unlocks your car. It is equipped with a battery within. The batteries have a lifespan that is a long time, and they eventually die. It is a common problem in all vehicles. The good news is you can replace the battery in all key fobs without having to replace the entire case. Amazon sells replacement fobs that have all the electronic components in place. It is easy to open the case and replace the batteries. It is important to remember that you will need to remove the emergency key first, and you can accomplish this by inserting the screwdriver of a small flathead into the slot that is located in the middle of the case. The case will split as you move the screwdriver around it.
If you're ready to change your keys, have a spare on hand. This can save you a lot of money. If you have a spare, you can ask the dealer to cut an entirely new key and then program it to the car, which is much cheaper than replacing the entire key fob.
It is possible to add a second key to your vehicle if you don't already have one, but it will require some research and effort. It will cost you a few hundred dollars to get a second car key. The computer in the vehicle must also be programmed. This can be accomplished by a professional, however it's an expensive option for most owners.
Replacement Ignition
The modern SAAB 9-3 features a more sophisticated alarm system built around a key code. This means that in the event that you lose your only working key, acquiring an additional one could be extremely expensive as the car has to have a specific computer module fitted and also needs to be specifically programmed to accept a new key. The majority of locksmiths aren't able to do this and a dealer will charge several hundred dollars to program the new key!
Dealers will charge you the highest price to replace your car's computer (also known as the CIM or SAAB twice) when you lose your only working key. We can reprogram the existing EEPROM of your car's computer to make it prepared for a new key. This will save you more than 50% of the cost you would have to pay the dealer.
If you've been an owner of an 03-11 SAAB 9-3, then you likely realize that the ignition key isn't the most robust. They can become extremely sticky, and the buttons are known to be ripped off at times, so you should consider getting a replacement if yours isn't working as it should. It's good to know that replacing the ignition key isn't as difficult as it seems, and it can be done fairly quickly with the right tools.